Introducing the MP60

We love waking up to good news.

EcoTech Marine, the company that revolutionized the reef aquarium propeller pump, is previewing their newest product, the MP60w ES, today at MACNA (Marine Aquarium Conference of North America) in Orlando, FL.

The MP60 is engineered for tanks holding 120 to over 1,000 gallons with up to one-inch glass thickness. The MP60 uses the same award-winning technology as the rest of EcoTech Marine’s VorTech line. Capable of pushing 5,500/gph, the MP60 offers the smallest in-tank footprint for a commercially available pump.

“The MP60 satisfies a pent-up market demand for VorTech technology in larger tanks,” said Tim Marks, president of EcoTech Marine. “Prior to this launch, aquarists with tanks having pane thicknesses greater than three-quarters of an inch had very few options for high-flow solutions. We are excited to provide this much desired solution for the most discerning and die-hard hobbyists. Performance and quality are always our top priorities. This addition is a natural evolution for us, and perfectly rounds out our VorTech line of products.”

The MP60 was designed to create the most flow in the smallest package possible. In EcoTech Marine’s quest to continually raise the bar on reef flow technology, the unit runs quiet, cool and with minimal vibration. “This is a very proud introduction for us,” added Marks.

The MP60’s unmatched flow and out-of-the-box multi-pump wireless communication makes it a terrific value for larger tanks. The MP60 leverages EcoSmart driver technology, introduced earlier this year, providing unmatched versatility, controllability and customization of flow patterns.

EcoTech Marine’s patented VorTech technology produces broad yet gentle flow while placing the motor outside the tank–preserving the beauty of the aquarium and enhancing the health of the tank’s ecosystem.

The MP60w ES is slated to be available later this year with an MSRP of $695.


  • Flow: 2,500 – 5,500 GPH
  • Wattage: 10 – 60 watts
  • Maximum Tank Thickness: 1″ (range 3/8″ – 1″)
  • Appropriate Tank Size Range: 120 to 1000+ gallons
  • Dimensions: Wet Side- 4″ diameter by 3” long. Dry Side – 4″ diameter by 2.8″ long.
  • Clearance Needed Behind Aquarium: 3.3″
READ  JBJ ATO Automatic Top-Off System: What YOU Need to Know


Constant Speed Mode – Pump runs continuously at a constant speed which can be set by the user.

EcoSmart Nutrient Transport Mode (NTM) – A two phase program to promote maximum health and nutrient export, as well as increased growth for corals. Alternates between a resonant standing wave and a surge effect to stir up and export nutrients.

EcoSmart Tidal Swell Mode (TSM) – Creates a harmonic balance in your aquarium reminiscent of the changing flow conditions that would be found in nature. Flow varies from left to right, right to left, calm, and ends with a great surge.

Reef Crest Random Mode – Reef Crest Random Mode simulates the high-energy conditions of a natural reef crest environment.

Lagoonal Random Mode – Simulates the gentler reef zone found in a natural lagoon.

Short Pulse Mode – Allows for wave pulse timings between 0.3 and two seconds, enabling the creation of FAST alternating flow throughout the tank. Use this mode to create a resonant standing wave.

Long Pulse Mode – Allows for wave pulse timings of between two seconds and 60 seconds, enabling the creation of slow alternating flow throughout the tank.

Feed Mode – Slows down pump to allow user to feed aquarium. User can select the duration and speed for Feed Mode.

Night Mode – Automatically reduce speed and operates continuously at that speed for a period of time during the night. User can select the duration and speed for Night Mode.

Battery Backup Mode – When used with our battery backup accessory, the VorTech pump will switch to Battery Backup Mode in the event of a power outage and will operate at a user set speed. The LED’s on your EcoSmart driver will count down to indicate how much power is available within the battery.

Auto-Dim – LED’s are turned off and display knob dimmed significantly, but pump functions in its current mode. User can program how long after use before the driver enters Auto-Dim.

On/Off Switch – Tap the on/off switch to turn off and turn on a pump. Hold this button to turn off all pumps in a master/slave group. Tap any pump in the groups’ on/off switch and that pump will turn back on.


  • EcoSmart Quick Start Manual: English
  • EcoSmart Full Instruction Manual: English