UV sterilizers remove unwanted algae and unfriendly bacteria and protozoa out of aquarium water by exposing them to high intensity ultraviolet light. If you have a nano aquarium less than 30 gallons, one of the easiest ways to outfit your tank with a UV sterilizer is by using JBJ’s NanoZapp.
Today, we’ll show you how to set one up in only a few short steps.
One piece of vinyl tubing will slip on to your return pump. Slide the UV sterilizer, lamp-side down, into the vinyl tubing attached to the pump. Then attach the other piece of vinyl tubing along with an elbow, if necessary. We also recommend securing your vinyl tubing in place with a couple of hose clamps, just to be safe.
Lower the pump and UV sterilizer into the back chamber of your aquarium and attach it to your return outlet. Plug in the pump and sterilizer and you’re good to go.
It is typically best to have the UV sterilizer setup as your last method of filtration after the mechanical and biological filters.
There are many different sizes and styles of UV sterilizers available. Some are submersible and for internal use, like the NanoZapp, while others are designed to be used externally. If you have any questions about UV sterilizers, please give us a call at 1-800-566-3474 or leave us a comment below.
To shop for UV sterilizers and to read product reviews from hobbyists just like you, click here. To read a more thorough explanation of how UV sterilizers work and how to set one up yourself, check out this article.